Made by Waterway
2 Speed 2 Horse Power Hot Tub Pump
This hot tub pump is mainly used on Larger hot tubs and spas like Hot Spring and Arctic Spas (note HotSpring pumps are relabelled to wave-master pumps), but can also be seen on many other brands as well.
It fits 2.5" plumbing on the front suction, which means that the front faceplate union is 93mm across and return union measures 78mm across the thread.
The pump has 2 speeds, low speed for heating the spa and high speed to boost water through the jets.
Replacement wise its a great replacement for the Franklin 10.8 / 3 Amp pumps.
All new pumps are despatched with the wet end fitted and the return pointing upwards, which means - When the new pump arrives from us the wet end return union will be pointing up, however, the wet end on the pump can easily be rotated the return union up, down, left or right by simply undoing the bolts that hold it onto the motor.
The wiring instructions for this motor are under the capacitor housing cover on the top of the pump motor.
Please note: This hot tub pump comes with no cable so you will have to re-use your existing cable.
Related Products
 £19.95 |  | |  £4.50 | | |  £0.95 (2) | | |  £3.30 |
