Made by Waterway
2 Speed 2.5 Horse Power Hot Tub Pump
This hot tub pump is mainly used on Larger hot tubs and spas like Hot Spring and Arctic Spas (note HotSpring pumps are relabelled to wave-master pumps), but can also be seen on many other brands as well.
It fits 2" plumbing which means that both the suction and return unions measure 78mm across the thread.
This hot tub pump has 2 speeds the low speed used for economic heating of the spa water and the high speed as a boost pump to make the jets work.
Replacement wise its a great replacement for the Franklin 10.8 / 3 Amp pumps.
Getting the right size face plate
This pump has a face plate that fits a 2" plumbing (68mm thread) union.
All new pumps are despatched with the wet end fitted and the return pointing upwards, which means - When the new pump arrives from us the wet end return union will be pointing up, however, the wet end on the pump can easily be rotated the return union up, down, left or right by simply undoing the bolts that hold it onto the motor.
The wiring instructions for this motor are under the capacitor housing cover on the top of the pump motor.
Please note: This hot tub pump comes with no cable so you will have to re-use your existing cable.
Related Products
 £19.84 |  | |  £0.89 (2) | | |  £4.10 | | |  £2.95 |
