Made by Waterway
This hot tub pump is used to boost jets operation.
When buying the 56 frame Waterway 1 speed hot tub pump as a replacement for your current model you may find that your pump has a smooth body as opposed to this style of hot tub pump, but as long as the ratings are the same it will still work perfectly. In most cases you will find that the wet end is the same but the motor may be made by a different company.
Getting the right size face plate
This pump has a face plate that fits a 2.5" plumbing union, the actual measurements and images can be seen in the following guide for more detail: Pump Union Guide
The wet end on the pump can easily be rotated to point either up, down, left or right by simply undoing the bolts that hold it onto the rear.
Please note: This hot tub pump comes with no cable so you will have to re-use your existing cable. (Wiring instructions under capacitor cover).
Manufacturers CodePart Number: PF-20-1N22X
Wet End Frame Size: 56
Pump Horse Power: 2
Pump Speeds: 1
Length (cm): 43
Width (cm): 20
Height (cm): 24
Motor HP: 2
Pump KW: 1.5
Pump Amps: 9.5
Pump RPM: 2800
Impellor HP Size: 4
Includes Cable: No
Please note all Hot tub Parts sold are UK Spec, which means designed for 230 V at 50Hz
Need More Detail?
At Hot Tub DIY we want to make it as easy as possible for you to repair or build your hot tub, the following guides relate to this product.
For a full list of guides please go to our Articles page and choose a section : Hot Tub Help Articles
Hot Tub Pump Guides