Made by Waterway
2 Speed 2 Horse Power Hot Tub Pump
Larger faceplate union on the front of the wet end (93mm thread).
This hot tub pump is used in a variety of different hot tubs in various forms. It fits 2.5" plumbing on the face plate which means it has a (93mm union thread) on the intake and the outlet is the standard 2" plumbing union (78mm).
This hot tub pump has 2 speeds the low speed used for economic heating of the spa water and the high speed as a boost pump to make the jets work.
When buying the Waterway 2 speed hot tub pump as a replacement for your current model make sure the amperage and connections are similar sized.
Getting the right size face plateThis pump has a face plate that fits a 2.5" plumbing union, the actual measurements and images can be seen in our how 'Hot Tub Guides and Videos' see Pump Union Guide
All new pumps are despatched with the wet end fitted and the return pointing upwards, which means - When the new pump arrives from us the wet end return union will be pointing up, however, the wet end on the pump can easily be rotated the return union up, down, left or right by simply undoing the bolts that hold it onto the motor.
The wiring instructions for this motor are under the capacitor housing cover on the top of the pump motor.
Please note: This hot tub pump comes with no cable so you will have to re-use your existing cable.
Related Products
 £19.84 |  |  |  £0.89 (2) |  |  |  £2.95 |