Heater Kit for a wooden hot tub.
Includes 2kw Auto heater (instead of 3kw)
If you have a wooden hot tub and require a simple but effective heating system then this bundle is for you and all that you require is contained: a heater, a pump and a filter canister plus all the connections and glues required.Fitting Description
- 2 x inlets that should be 24" away from each other and 6" above the base of the hot tub
- Gate valve
- Filter canister
- Gate valve
- Gate Valve
- 1 x inlet to return water back to tub
Includes digital downloadable PDF diagram of which parts go where
The bundle is all plumbed with 1.5" pipe ID (Internal Diameter) and can easily be modified to direct the water through 6 jets in the side wall of the wooden hot tub.
Fitting instructions is included on each of the product pages, for example the heater will require the pressure switch to be brought inline so it cannot switch on when the pump is not running.
This kit requires 2 x electrical plugs to complete, wires are included with both the pump and the heater unit.
The heater unit is 2kw 8 amps and the pump is 3.8 amps, which means you can get away with a single plug for both the heater and for the pump.
A filter cartridge is provided inside the filter canister.
Any further questions please get in touch.