Made by Waterway
This pump is one of the biggest used on demestic pumps and is used vary rarely, It has a 2.5" intake and 2" outlet. This hot tub pump is used for the boost jets operation.
Waterway 3hp pumps can be used to replace other manufacturers pumps for example Aqua-Flo pumps and EMG pumps where the plumbing is similar.
Getting the right size face plate
This pump has a face plate that fits a 2.5" plumbing union, the actual measurements and images can be seen in the following guide for more detail: Pump Union Guide
The wet end on the pump can easily be rotated to point either up, down, left or right by simply undoing the bolts that hold it onto the rear.
This pump is complete and is sold without pump unions.
Please note: This hot tub pump comes with no cable so you will have to re-use your existing cable. (Wiring instructions under capacitor cover)
Manufacturers CodePart Number: 3R11250-0D
Wet End Frame Size: 56
Pump Horse Power: 3
Pump Speeds: 1
Length (cm): 43
Width (cm): 20
Height (cm): 24
Motor HP: 3.21
Pump KW: 2.25
Pump Amps: 12.6
Pump RPM: 2840
Impellor HP Size: 5
Includes Cable: No
Please note all Hot tub Parts sold are UK Spec, which means designed for 230 V at 50Hz
Need More Detail?
At Hot Tub DIY we want to make it as easy as possible for you to repair or build your hot tub, the following guides relate to this product.
For a full list of guides please go to our Articles page and choose a section : Hot Tub Help Articles
Hot Tub Pump Guides