Genesis 900W Heated Air Blower

Made by Genesis

This is a G90-2HN-S which is the replacment for a GB90-2HJ-B used mainly on Spaform hot tubs, Milano, Grand Canyon.......

It has a small heater inside it similar to a hair dryer which means if you put your hand in front of it when its on you get warm air coming out of it.

This is the most common and is easily recognisable by its colour firstly and then by the small heating element inside the neck of the blower.

• Cable : 3 core with moulded plug
• Heating element built inside
• Watts : 900W
• Amps : 5

Note Genesis air blowers have a small fuse inside the body of the blower on a small PCB.

2 screws hold the top of the connection cover on top of the air blower, check for power inside and then their is a small fuse inside the blue body (20mm 6.3amp)which can be accessed via taking out the remaining 4 screws and removing the neck spring with a pair of pliers (please don't just snap the neck of, but if you do it is easy to glue back on.)

The hot tub air blower comes with threaded male connection to connect to the existing union in your hot tub. It comes with a standard 3 core cable, but it can easily be changed for your existing cable on site if required.

Related Products

Product Specification

Manufacturers Code

MPN:  GB90-2HJ-B

Product Attributes

Quick Find Code:  40004
Brand:  Balboa
Length (cm):  28
Width (cm):  18
Height (cm):  19
Motor HP:  1.21
Amps:  5
Watts:  900 + 250 heater

Please note all Hot tub Parts sold are UK Spec, which means designed for 230 V at 50Hz

The following manuals are available for this product

Need More Detail?

At Hot Tub DIY we want to make it as easy as possible for you to repair or build your hot tub, the following guides relate to this product.

For a full list of guides please go to our Articles page and choose a section : Hot Tub Help Articles

Hot Tub Electrical Guides

Customer Reviews