Made by Aqua-Flo pumps
This is a complete 1 speed 3HP pump. Please compare the detail on the metal side plate to make sure you order the correct complete pump, the easiest way is to compare the amps.
Includes cable and moulded JJ plug for easy quick replacement. (if this is the incorrect connection for your hot tub or spa simply replace with your existing cable or call for other cable options).
The faceplate for this pump is described as 2" which means it will fit 2" plumbing, the actual measurements and images can be seen in the following guide for more detail: Pump Union Guide
The wet end on the pump can easily be rotated to point either up, down, left or right by simply undoing the bolts that hold it onto the rear.
Note* Pump is similar to a Waterway (EMG) Pump, you can replace the complete pump, but the separate components do not fit each other, the connection to the wet end is different, the shaft seal is different and so on.
Call if this is not clear.
Separate parts are available for this hot tub pump: Shaft Seal, Wet End
Manufacturers CodePart Number: 91041940-300
Wet End Frame Size: 56
Pump Horse Power: 3
Pump Speeds: 1
Length (cm): 42.7
Width (cm): 20.2
Height (cm): 24.1
Motor HP: 3
Pump KW: 2.25
Pump Amps: 12.8
Pump RPM: 2840
Impellor HP Size: 2.5
Wet End Suction Location: Middle
Wet End Return Union Size: 2
Wet End Suction Union Size: 2
Please note all Hot tub Parts sold are UK Spec, which means designed for 230 V at 50Hz
Need More Detail?
At Hot Tub DIY we want to make it as easy as possible for you to repair or build your hot tub, the following guides relate to this product.
For a full list of guides please go to our Articles page and choose a section : Hot Tub Help Articles
Hot Tub Pump Guides