Made by AquaFlo
Manufacturers Description - Aqua-Flo 5HP XP3 56 frame Wet End
Designed to fit 1 or 2 speed 2 HP Motors (Max Amperage 12.5 Amps)
With this product you will receive the complete wet end assembly to fit a AquaFlo 56 frame hot tub motor. Everything you need to replace your current wet end including the shaft seal is factory fitted.
This is designed to fit 2.5" plumbing connections to the pump unions. (Actual size 9.3cm).
Both suction and pressure have a flat smooth connection meaning that the o'ring would be attached to the union sleeve. The impeller is screwed on to the shaft which protrudes from the center of the hot tub pump body. The 56 Frame Aqua-Flo 5HP hot tub wet end fixes to the Hot tub pump body with 4 x small bolts. So is very easy to fit to your spa when replacing your Hot tub pump or just the wet end connection.
Comes with a Aquaflo PS200 shaft seal and impeller factory fitted.
What is included in this Hot Tub Wet End unit?
- The housing,
- The face plate,
- The face plate o-ring,
- The 5.0hp impeller,
- The ceramic seal kit,
- This unit also includes 1 built in bleed screws and 3 other ports for adapters on the faceplate.
Please Note: Although this wet end is labelled as 5HP it is commonly fitted to our 2.5HP Aqua-Flo spa motor.
Manufacturers CodePart Number: 91042125-000
Wet End Frame Size: 56
Width (cm): 20
Height (cm): 23
Impellor HP Size: 5
Wet End Suction Location: Middle
Wet End Return Location: Offset To The Right
Wet End Return Union Size: Fits 2.5" Plumbing (93cm Wide)
Wet End Suction Union Size: Fits 2.5" Plumbing (93cm Wide)
Includes Seal: Yes (PS200 Shaft Seal)
Please note all Hot tub Parts sold are UK Spec, which means designed for 230 V at 50Hz
Need More Detail?
At Hot Tub DIY we want to make it as easy as possible for you to repair or build your hot tub, the following guides relate to this product.
For a full list of guides please go to our Articles page and choose a section : Hot Tub Help Articles
Hot Tub Pump Guides