Hot Tub Pump Made By Emerson
This is a replacement 48 Frame 2 Speed 2hp Pump for the AquaFlo Flow Master Pump, it is made from the same wet end found on a Aquaflo pumps and a Emerson 2hp motor (UK Spec Motor) Due to the original motors no longer being available.
The hot tub pumps are exactly the same size (please see photos) which make for a really easy fit.
The pump is easily recognisable due to being smooth sided like a can with a capacitor housings being mounted on the top of the motor.
This pump will come with a 2" (7.6cm wide) plumbing connections, please get in touch if you require the larger 2.5" (9.3cm wide) plumbing connections.Getting the right size face plate
Their are 2 sizes of faceplate for this pump described as 2" and 2 1/2" the actual measurements and images can be seen in our how 'Hot Tub Guides and Videos' see Pump Union Guide
The wet end on the pump can easily be rotated to point either up, down, left or right by simply undoing the bolts that hold it onto the rear.
This pump is 2hp please see specification tab.
Note when fitting the wet end can be rotated to embrace plumbing that comes in from the side.
Fits 2" plumbing unions (6.8cm O/D), but a 2.5" faceplate can also be fitted on request (8.1cm O/D).
No Cable is included with this pump, please see cables sold separately.
Manufacturers CodePart Number: ht-diy-xp2e-2hp
Wet End Frame Size: 48
Pump Horse Power: 2
Pump Speeds: 2
Length (cm): 41
Width (cm): 21.5
Height (cm): 21.5
Pump Amps: 2.9 / 9.0
Pump RPM: 1425 / 2850
Impellor HP Size: 2
Includes Cable: No
Wet End Return Union Size: 2" Plumbing (7.6cm Wide)
Wet End Suction Union Size: 2" Plumbing (7.6cm Wide)
Power Volts: 230 Volts
Please note all Hot tub Parts sold are UK Spec, which means designed for 230 V at 50Hz
Need More Detail?
At Hot Tub DIY we want to make it as easy as possible for you to repair or build your hot tub, the following guides relate to this product.
For a full list of guides please go to our Articles page and choose a section : Hot Tub Help Articles
Hot Tub Pump Guides