Made by Balboa
Genuine Balboa Replacement PCB.
This circuit board is used on many hot tubs and spas (see below) and is easily recognised by its manufacturers code 54126, it is M3 which means it needs a pressure switch to run and is not compatible with the more modern M7 systems.
The PCB is very easy to fit and can be tested by removing all plugged in components and testing via a multimeter.
If the panel looks odd when fitted change the 'Filter' from A to B.Hot Tub Brands
This PCB is compatible with many brands of hot tub including: Spaform (SF100), Leisureite, Hydrospa, Hydropool, Canadian Spa, Catalina, Aegean, Aquamonde (52456)
This part should be fitted by a experienced tradesman or a competent individual as a faulty install could result in board damage and invalidate warranty.
Regarding returns: It is note possible to return a Circuit board if it has been taken out of it's protective bag and or been fitted, so therefore please be careful when diagnosing and testing the hot tub fault correctly.
Manufacturers CodePart Number: 54126
Width (cm): 24
Height (cm): 18
Make & Model: 54126
Pump 1: Single or dual speed
Pump 2: Single (or dual speed with no blower) (J10)
Pump 3: N/A
Air Blower: Yes
Light option: 12 volt or 230 volt
Topsides Compatible: VL Range (J7 Switch to Deluxe)
Circulation Pump: Optional (J6)
Please note all Hot tub Parts sold are UK Spec, which means designed for 230 V at 50Hz
Need More Detail?
At Hot Tub DIY we want to make it as easy as possible for you to repair or build your hot tub, the following guides relate to this product.
For a full list of guides please go to our Articles page and choose a section : Hot Tub Help Articles
Hot Tub Electrical Guides