Made by Balboa
Balboa Replacement: 54510
This is a brand new PCB (Printed Circuit Board) from Balboa and should only be used to replace a faulty board of the same type.
This PCB can be used for many combinations of components, but it is best to stick to the specific that it is designed for - see list below.
The Balboa 54510 PCB will only fit a balboa plastic control box.
When fitting remember to adjust the small jumpers to the same as the board you are replacing. If the panel looks odd when fitted change the 'Filter' from A to B.Other Specifications
Easy to Fit.
1 x pumps (single or dual speed)
1 x Circulation pump
Works with 2 x M7 Sensors
Light 12v or 230v
Compatible Panels: MVP260, VL404 or Mini VL200
Please call if you need help with this hot tub part.
This part should be fitted by a experienced tradesman or a competent individual as a faulty install could result in board damage and invalidate warranty.
Regarding returns: It is note possible to return a Circuit board if it has been taken out of it's protective bag and or been fitted, so therefore please be careful when diagnosing and testing the hot tub fault correctly.
Manufacturers CodePart Number: 53356
Width (cm): 28
Height (cm): 13
Please note all Hot tub Parts sold are UK Spec, which means designed for 230 V at 50Hz
Need More Detail?
At Hot Tub DIY we want to make it as easy as possible for you to repair or build your hot tub, the following guides relate to this product.
For a full list of guides please go to our Articles page and choose a section : Hot Tub Help Articles
Hot Tub Electrical Guides