Home > Electrical Parts > Hot Tub Pumps > Balboa Pumps
No stock, delayed despatch
The Balboa Niagara Pump can be used as a direct replacement as well as a upgrade for 56 frame pumps that have height restrictions, it comprises of a Simel motor (made in Italy) and a Niagara Wet End.
If you have an Ultimax pump with a Simel motor and Vico (Sta Rite) wet end then this is a direct replacment and swaps over easily.
The pump is easily recognisable due to the 2 capacitor housings being mounted either side of the motor in a saddle bag style.
Their are 2 hp sizes currently available 2hp (this one) and 3hp in a 2 speed option. (please see the images and specification to get the correct hp).
Note when fitting the wet end can be rotated to embrace plumbing that comes in from the side.
Fits 2" plumbing unions (6.8cm O/D)
Includes 2.5m 4 core cable with 4 pin Amp Connector fitted
Quick Find Code: 11012Brand: BalboaWet End Frame Size: 56Pump Horse Power: 2Pump Speeds: 2Length (cm): 45Width (cm): 20.3Height (cm): 20.3Pump KW: 0.35 / 1.3Pump Amps: 1.9 / 9.0Pump RPM: 1400 / 2800Impellor HP Size: 2Includes Cable: Yes 4 Pin AMPWet End Suction Location: RightWet End Return Union Size: 2Wet End Suction Union Size: 2
Please note all Hot tub Parts sold are UK Spec, which means designed for 230 V at 50Hz
At Hot Tub DIY we want to make it as easy as possible for you to repair or build your hot tub, the following guides relate to this product.
For a full list of guides please go to our Articles page and choose a section : Hot Tub Help Articles
Hot Tub Pump Guides
Great company who were excellent help to ensure we had the right parts for our hot tub will definatly recommend and continue using this company thank you so much
Was this helpful to you? Yes / No
This review has not been appraised.
What can you say, great company with great advise. Talked through with them on what pump l would need for our spar, ordered on Wednesday delivered by Friday morning, fitted it that day. I couldn't have found a better company. Thank you guys.
New Balboa Pump, easy fit and perfect.
Excellent service received for this replacement pump
Very happy with my deal and the quick reply i got on the phone when i had questions regarding mounting the piece correctly
1st class service excellent adviseWill definitely use again
Was a bit concerned about the part numbers being different, but Hot tub diy confirmed this was a direct replacement, although in picture the wet end had a nipple on inlet & outlet that mine did not, but went ahead and ordered.Arrived next day and thankfully the nipples were not drilled through (just there in case you needed to connect to one and drill through) Fitting was a slight difference and had to loosen control box to make sure mating faces were lined up snug on both inlet & outlet and then re-fixed control box (was only about 6/7mm difference and tbh could have been because was a month pump was out of spa and shrunk??) Refilled spa and was all ok...no leaks.Thanks Hottubdiy for a pain free order/delivery and product, at a very reasonable cost.