LX DH1.0 Whirlpool Pump

Description

Made by LX / Whirlpool Pumps

LX DH1.0 Circulation Pump

This is a very common hot tub pump which is also found in whirlpool baths, it is quite and low vibration which means it will run nearly silently inside your hot tub whilst circulating.

The DH1.0 pump runs at 2900 RP draws 3.8 amps, which means its low cost to run 24 hours a day, and this is what its designed for, it can be seen with an air switch fitted at the rear of the capacitor housing which is available separately (TBS106A air switch).

If you have a Chinese Spas, AMC Winer Spa, Spa Serve or DanZ Spas you will probably have this pump fitted as a circulation pump, it is also a great replacement for some other pumps like DXD or expensive pump brands.

What's in the box

• New DH1.0 Circulation Pump
• Fitted Power Cable 1.4m
• Earth Cable
• 2 x Unions (1.5" Plumbing) & Seals

Hot Tub Repair Tips

If your Dh1.0 has failed, it will probably be due to something other than a manufacturing fault, for example a blockage or restriction of flow due to dirty or old filters, how ever some spares are available on request for this hot tub pump.

Parts like impeller, wet end and shaft seals are available separately for this pump which make it great for people who like to do there own repairs.

Fitted inside is a 15uF Capacitor.

This Spa pump is supplied with a 3 core cable with a plain end.

Manufactured to BS, ASTM and ISO standards

Specification

Manufacturers Code :MPN:  DH1.0

Quick Find Code:  21006
Brand:  LX
Item Height:  19.5
Item Width:  16
Item Length:  34
Wet End Frame Size:  Unknown
Pump Horse Power:  1
Pump Speeds:  1
Motor HP:  1
Pump KW:  0.75
Pump Amps:  3.8
Pump RPM:  2900
Impellor HP Size:  1
Includes Cable:  Yes
Wet End Suction Location:  Bottom
Wet End Return Location:  Middle
Wet End Return Union Size:  1.5
Wet End Suction Union Size:  1.5
Type:  Hot Tub Circulation Pump

Operating Temperature from 0°C to 60°C

Max Water Pressure : 230PSI / 16 BAR