WaterWay Executive Pump 2hp 2spd (2'' x 2'')
  Zoom
WaterWay Executive Pump 2hp 2spd (2'' x 2'')WaterWay Executive Pump 2hp 2spd (2'' x 2'')WaterWay Executive Pump 2hp 2spd (2'' x 2'')
WaterWay Executive Pump 2hp 2spd (2'' x 2'')WaterWay Executive Pump 2hp 2spd (2'' x 2'')

WaterWay Executive Pump 2hp 2spd (2" x 2")

Quick Find Code:  10107
  (2 Reviews)
Our Price:  £755.00(Inc. 20% VAT)

Availability:  

  

No stock, discontinued

  • Low profile
  • Easy to replace
  • Next Day Delivery Available
Emerson

Hot Tub Pump Made By Emerson

This is a replacement 48 Frame 2 Speed 2hp Pump for the Waterway Executive Pump, it is made from the same wet end found on a Executive pump and a Emerson 2hp motor (UK Spec Motor) Due to the original motors no longer being available.

The hot tub pumps are exactly the same size (please see photos) which make for a really easy fit.

The pump is easily recognisable due to being smooth sided like a can with a capacitor housings being mounted on the top of the motor.

This pump will come with a 2" (7.6cm wide) plumbing connections, please get in touch if you require the larger 2.5" (9.3cm wide) plumbing connections.

Getting the right size face plate

Their are 2 sizes of faceplate for this pump described as 2" and 2 1/2" the actual measurements and images can be seen in our how 'Hot Tub Guides and Videos' see Pump Union Guide

The wet end on the pump can easily be rotated to point either up, down, left or right by simply undoing the bolts that hold it onto the rear.

This pump is 2hp please see specification tab.

Note when fitting the wet end can be rotated to embrace plumbing that comes in from the side.

Fits 2" plumbing unions (6.8cm O/D), but a 2.5" faceplate can also be fitted on request (8.1cm O/D).

No Cable is included with this pump, please see cables sold separately.


Related Products

Product Specification

Manufacturers Code

MPN:  ht-diy-ex-2hp

Product Attributes

Quick Find Code:  10107
Brand:  Emerson
Item Height:  21.5
Item Width:  21.5
Item Length:  41
Wet End Frame Size:  48
Pump Horse Power:  2
Pump Speeds:  2
Pump Amps:  2.9 / 9.0
Pump RPM:  1425 / 2850
Impellor HP Size:  2
Includes Cable:  No
Wet End Suction Location:  Right
Wet End Return Union Size:  2" Plumbing (7.6cm Wide)
Wet End Suction Union Size:  2" Plumbing (7.6cm Wide)
Volts:  230 Volts
Type:  Hot Tub Pump

Please note all Hot tub Parts sold are UK Spec, which means designed for 230 V at 50Hz

The following manuals are available for this product


Need More Detail?

At Hot Tub DIY we want to make it as easy as possible for you to repair or build your hot tub, the following guides relate to this product.

For a full list of guides please go to our Articles page and choose a section : Hot Tub Help Articles

Hot Tub Pump Guides


Customer Reviews

Average Rating (2 Reviews):  
Write a Review and share your opinions!

Rating:  
The perfect fit
Tuesday, 12 September 2017  | 

Having to fit a replacement pump into an old hot tub with very limited space was made much easier as this pump perfectly matched the mounting points and pipe fitting points of the old american pump and motor set. My recommendation, dont try to crowbar a cheaper motor into the wrong size hole to save a bit of money - the sweat isn't worth it.

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
Hot tub replacement pump
Thursday, 27 August 2015  | 

Pump received within two days of ordering. I was unsure whether this was the correct item for my hot tub and was able to speak to an engineer prior to ordering, who was very helpful. Would use again.

Was this helpful to you?  Yes  /  No

This review has not been appraised.

Please note all Hot tub Parts sold are UK Spec, which means designed for 230 V at 50Hz