Made by Balboa / Hydroair
This is a controlled system which means it is not just a power 'on and off' model, it requires the HydroAir Genesis Topside Control - UK01658A (sold separately) to work, this has the advantage that if the control system that manages your existing air blower on either your bath or spa has failed, a combination of the 2 is a complete solution.
This air blower is easily recognized by its blue colour, it is easily replaced and has a clear specifications label on the underside..
*Note Genesis air blowers have a small fuse inside the body of the blower on a small PCB, so if power is getting to the unit but nothing is happening, check the fuse first.Genesis 700w Hot Tub Air Blower connection information:
The hot tub air blower comes with threaded male 1" connection to connect to the existing union in your hot tub. It comes with a standard 3 core cable, but it can easily be changed for your existing cable on site if required.
*Note the 1" union is not included and can be bought separately.Testing your air blower
2 screws hold the top of the connection cover on top of the air blower, check for power inside and then their is a small fuse inside the blue body which can be accessed via taking out the remaining 4 screws and removing the neck spring with a pair of pliers (please dont just snap the neck of, but if you do it is easy to glue back on.)
Manufacturers CodePart Number: GA70-2VHS
Length (cm): 28
Width (cm): 18
Height (cm): 19
Motor HP: 0.6
Includes Cable: Yes
Watts: 700 (950 inc heater)
Includes: Built in heater
Please note all Hot tub Parts sold are UK Spec, which means designed for 230 V at 50Hz
Need More Detail?
At Hot Tub DIY we want to make it as easy as possible for you to repair or build your hot tub, the following guides relate to this product.
For a full list of guides please go to our Articles page and choose a section : Hot Tub Help Articles
Hot Tub Electrical Guides