Genuine Balboa Part
Manufacturers Code: 55216 - Balboa GL2001
The GL2001 is designed for a 3 pump or blower option - first 2 pumps (1 or 2 (dual) Speed), third pump or blower, a circulation pump if required and the standard Ozone and 12 volt light. It runs on 230v at 50Hz and should be fitted by a competent individual or trades person.
This is for the complete control box only and doesn't include cables to connect pumps or topside controller.
Standard control panels used on this box are ML range such as the ML700 and ML900 panels.
This box is a great upgrade if you have an old GL2001 PCB housed in a metal box, because other than changing over to this box the only other thing you would need to do is change the cable ends
You will receive the new black control box please note old grey is no longer available.
- High limit and Thermostat included
- M7 Sensors included
- Heater Length 15" (38cm)
- 230 volts, 3.0Kw 12.5 amps
This control system is built with Balboa M7 Technology, which means no flow switch or pressure switch, just 2 thermostats 1 either side of the heating element.
Manufacturers CodePart Number: 55216
Length (cm): 32
Width (cm): 12
Height (cm): 27
Connection: D Pin Direct to PCB
Plumbing Size (Inch's): Fits 2" Plumbing
Pump 1: Single or dual speed pump + circulation pump if required
Pump 2: Single or dual speed Pump
Pump 3: Single Speed
Air Blower: Ready
Light option: 12 Volt
Ozone: If Required
Topside Controller Included: No
Topsides Compatible: ML Range ML700 and ML900
Radio TV/AV: Ready
Please note all Hot tub Parts sold are UK Spec, which means designed for 230 V at 50Hz
Need More Detail?
At Hot Tub DIY we want to make it as easy as possible for you to repair or build your hot tub, the following guides relate to this product.
For a full list of guides please go to our Articles page and choose a section : Hot Tub Help Articles
Hot Tub Heater Guides