Balboa GS100 Heater Kit.
2kw Element for low voltage included.
If you are making, upgrading or repairing a hot tub / spa (Just hot bubbles) and require a simple but effective heating system with a control panel that shows the temperature then this kit is for you.
It includes all the parts and glues required to build and connect the pluming along with a basic diagram that shows you where it all roughly fits.
This kit is also great if you're thinking of adding water jets or a 2 speed pump later because the control panel / control system can also accommodate these.Fitting Description
- 2 x inlets that should be 24" away from each other and 6" above the base of the hot tub
- Gate valves
- waterway Filter canister - C4950 paper filter inside
- Gate valve
- GS100 control system
- Gate Valve
- 1 x inlet to return water back to tub
Includes digital downloadable PDF diagram of which parts go where
The bundle is all plumbed with 1.5" pipe ID (Internal Diameter) and can easily be modified to direct the water through 6 jets in the side wall of the wooden hot tub.
Fitting instructions is included on each of the product pages, for example the heater will require the pressure switch to be brought inline so it cannot switch on when the pump is not running.
This kit requires 2 x electrical plugs to complete, wires are included with both the pump and the heater unit.
The heater unit is 2kw 8 amps and the pump is 3.8 amps.
A filter cartridge is provided inside the filter canister.
Any further questions please get in touch.
Manufacturers CodePart Number: Does not apply
Please note all Hot tub Parts sold are UK Spec, which means designed for 230 V at 50Hz
Need More Detail?
At Hot Tub DIY we want to make it as easy as possible for you to repair or build your hot tub, the following guides relate to this product.
For a full list of guides please go to our Articles page and choose a section : Hot Tub Help Articles