Built with Balboa GS100
LX Pump and Waterway Plumbing
This bundle of parts is designed to fit a wooden hot tub and give it 6 jets powered by a 2 speed pump and control system which has a 3kw heater and filter.
Note it is a large kit, and as such probably not suited to a beginning DIYer.
The price is based on the total cost of all the parts minus 10%, this of course includes the assistance of how to put it all together and a basic drawing of what goes where.
The main notes when assembling are similar to the wooden heater bundle that we sell, but note the the control panel and the air controller need to be the at the maximum water height.
You will also notice that the jet comes in 4 parts:
- The body
- Long Wall fitting
- The Jet or Adjustable Nozzle
There are 2 manifolds 1 x water and 1 x air, which can be placed anywhere, but are best placed at:
- water at the lowest point under where the jets are situated
- air directly connected to the air controller.
The 2 x suctions need to be at least 2 foot apart and usually placed 3” from the floor on the side walls.
All the rest of the plumbing is designed to enable fitting the parts together
Manufacturers CodePart Number: Does not apply
Please note all Hot tub Parts sold are UK Spec, which means designed for 230 V at 50Hz
Need More Detail?
At Hot Tub DIY we want to make it as easy as possible for you to repair or build your hot tub, the following guides relate to this product.
For a full list of guides please go to our Articles page and choose a section : Hot Tub Help Articles