Made by Balboa WaterGroup
GS100 Complete Control System = Heater control panel and control boxGreat for tight spaces includes 10" M7 Heater Tube.
Runs 1x (1 or 2 speed) Pump, 10v Light, Ozone (120V/240V Switchable).
This system consists of a GS100 control box, 2kW Heater, a VL401 control Panel (16cm x 5.7cm) and 3 cables, 1 x 2 speed pump, ozone cable and a 2 pin light cable.
This system is made of M7 Technology which is a Balboa twin sensor control system, this means you don't need to drill a hole for a temperature thermostat, their is no pressure switch or high limit sensor, the system works by sensing the difference between the two thermostats, pre heater is the current temperature post heater is the hi limit and if both sensors are the same the element is working.
The M7 systems are great for upgrades on hot tubs because their so easy to fit into a system, this also applies if your building a hot tub from new.
Manufacturers CodePart Number: GS100-VL401
Length (cm): 25.5
Width (cm): 7.3
Height (cm): 13.3
Plumbing Size (Inch's): 1.5" Plumbing
Includes: All Cables
Pump 1: Single or dual speed
Pump 2: No Connection
Pump 3: No Connection
Air Blower: No Connection
Heater: 2 kw M7
Light option: 12 Volt
Topside Controller Included: VL200
Circulation Pump: No Connection
Radio TV/AV: Ready
Please note all Hot tub Parts sold are UK Spec, which means designed for 230 V at 50Hz
Need More Detail?
At Hot Tub DIY we want to make it as easy as possible for you to repair or build your hot tub, the following guides relate to this product.
For a full list of guides please go to our Articles page and choose a section : Hot Tub Help Articles
Hot Tub Electrical Guides