Made by Balboa WaterGroup
GS510DZ Complete Control System
This system consists of a GS510DZ control box (kW), a VL801D touch panel (18.7cm x 8.3cm) and 5 cables in total, 1 x 2 speed pump cable, 3 x 3 core cables for the circ pump / blower or ozone cable and a 2 pin light cable.
This system is made of M7 Technology which is a Balboa twin sensor control system, this means you don't need to drill a hole for a temperature thermostat, their is no pressure switch or high limit sensor, the system works by sensing the difference between the two thermostats, pre heater is the current temperature post heater is the hi limit and if both sensors are the same the element is working.
The M7 systems are great for upgrades on hot tubs because their so easy to fit into a system, this also applies if your building a hot tub from new.
If you need more help getting the right Balboa parts then please get in touch.
Manufacturers CodePart Number: PK-51044
Length (cm): 50
Width (cm): 12
Height (cm): 27
Plumbing Size (Inch's): 2
Includes: All Cables
Pump 1: Single or dual speed Pump
Pump 2: Single Speed
Pump 3: No Connection
Air Blower: Ready
Heater: 3kw M7
Light option: 12 Volt
Topside Controller Included: VL801D
Circulation Pump: Ready
Radio TV/AV: Ready
Please note all Hot tub Parts sold are UK Spec, which means designed for 230 V at 50Hz
Need More Detail?
At Hot Tub DIY we want to make it as easy as possible for you to repair or build your hot tub, the following guides relate to this product.
For a full list of guides please go to our Articles page and choose a section : Hot Tub Help Articles
Hot Tub Electrical Guides
|Average Rating (1 Review): |
Wednesday, 6 June 2018 | Dave
This controller upgrade was seamless; existing plumbing interfaced with no hitches, all cables connected directly to the motors (with colour for colour replacement), the DIP switch configuration was preset for a dual speed primary pump, even the control panel fitted directly in to the existing hole in the shell.
The unit was fitted in under 2 hours and the tub back to temperature and in operation the following morning.
Great service and support.
Was this helpful to you? Yes / No
This review has not been appraised.