LX 3kw Heater Element

Made By LX

LX Spa Heating Element - 3000 Watt.

This hot tub heater element will only fit LX heater tubes and only comes in 3KW, it will fit both the Straight and L Shaped LX Heater Tubes

3KW LX Heating Element Dimensions:

• Distance between terminals 2.7cm
• Comes with new seals, nuts (lock nut type)

Fits all shapes of LX heaters

LX Element

To remove existing hot tub heating elements, push down on both elements and slide them straight out. When replacing a hot tub elements you should also always replace the heater tube seals.

Please note when fitting a new element do not over tighten the element retaining nuts and be extremely careful not to over tighten the nuts holding the connections.

How to test if your heating element is tripping your hot tub:

• The hot tub will only trip when the power is sent to the element usually 5 seconds after its switched on or after prime mode.
• Always try the hot tub with out its filter fitted when the filter is removed look for foreign objects inside the filter bay.
• Switch the power of to the hot tub, disconnect the element (isolate the connections to save accidents) and switch back on, if the hot tub doesn't trip change the element.
• Look for signs of corrosion around the seals in the tube, also look for any other water around the control pack.

Related Products

Product Specification

Manufacturers Code

MPN:  H30-3kwe

Product Attributes

Quick Find Code:  30118
Brand:  LX
Item Width:  3
Item Length:  16.8
Material Type:  Standard
Amps:  12
KW:  3
Distance Between Terminals:  2.7
Type:  Heating Element

Please note all Hot tub Parts sold are UK Spec, which means designed for 230 V at 50Hz

The following manuals are available for this product

Need More Detail?

At Hot Tub DIY we want to make it as easy as possible for you to repair your hot tub, the following guides relate to this product.

For a full list of guides please go to our Articles page and choose a section : Hot Tub Help Articles

Hot Tub Heater Guides

Customer Reviews