Made By LX / Whirlpool
LX H30-R1 Heater - Chinese Hot Tub Heater
This LX H30-R1 heater fits 1.5" plumbing which means the thread on the union connectors is 61mm, the length of the tube on its own is 25cm without the unions and it only has 1 cable coming out the side excluding the green earth wire.
Its usually found fitted to Chinese hot tubs with TCP-8 and KL8 control systems like in Spa Serve Spas, but can be used for upgrades and repairs on any make or model of hot tub or spa.
Inside the heater under the cap it has an integrated pressure switch and high limit detectors.
Rooster Heater Replacements Only
If you require a replacement for a rooster heater LX heater tubes make a great replacement, the connections are compatible and the length of the tubes is very similar, regarding the power cable the rooster has a 5 core cable (2 lines and 2 neutrals) because this heater has a built in pressure switch you can by pass the black box that is needed for the rooster heaters and wire this heater direct to your control box instead. (it makes for a lot easier repair.)
To get the right LX H30-R1 heater:
There are 2 sizes of H30-R1 Heater and also 2 options with or without the extra pressure switch cable, this is the smaller size without the pressure switch cable. Please double check the detail to get this right.
- Fits 1.5" Plumbing (61mm unions)
- Length of heater including fittings unions 29.5cm (tube only 25cm)
- Width of metal tube 5cm
Comes complete with:
- 1m power cable,
- 1.5" female hot tub heater unions and tail pieces,
- 2 new seals and factory fitted element.
- Includes Built In Pressure Switch
Make sure their are no blockages or restrictions of water flow, filters are clean and all air is removed from the heater tube before switching on the power.