Made by Air Supply of the future
Max Air 1HP Air Blower
This air blower is black in colour, its fits 1.5" (4.8cm Hole) plumbing, and is easy to replace.
The pump is controlled by the control system on the hot tub, so with regards to testing, if its not getting any power the control unit is at fault, not the air blower.
Max Air Hot Tub Air Blower connection information:
This unit screws to either the inside of the cabinet or the floor, the 1.5" plumbing slips into the end of the unit and will need to be secured by putting a screw through both the plastic spout and the 1.5" plumbing.
It is also possible to fit this air blower onto 2" plumbing using a socket or reducer.
Previously used on Artic Spas
Manufacturers CodePart Number: 251022F-RFI
Brand: Air Supply Of The Future
Length (cm): 22.9
Width (cm): 16.5
Height (cm): 17
Motor HP: 1
Includes Cable: Yes
Connection: 4.8cm I/D 5.7cm O/D
Please note all Hot tub Parts sold are UK Spec, which means designed for 230 V at 50Hz
Need More Detail?
At Hot Tub DIY we want to make it as easy as possible for you to repair or build your hot tub, the following guides relate to this product.
For a full list of guides please go to our Articles page and choose a section : Hot Tub Help Articles
Hot Tub Electrical Guides
|Average Rating (1 Review): |
Sunday, 29 June 2014 | Dave
Was this helpful to you? Yes / No
This review has not been appraised.