Made By LX / Whirlpool
Large H30-R1 LX Heater with Control Line (the extra pressure switch cable)
LX Chinese Hot Tub Heater
This LX H30-R1 heater fits 2" plumbing which means the thread on the union connectors is 76mm, the length of the tube on its own is 33cm without the plastic unions and it has 2 cables coming out the side excluding the green earth wire one for power and the other a control line (pressure switch cable).
Its usually found fitted to Chinese hot tubs with Chinese control systems, but can be used for upgrading and repairs on any make or model of hot tub or spa if required.
Inside the heater under the cap it has an integrated pressure switch and high limit detectors.
Important!
To get the right LX H30-R1 heater:
There are 2 sizes of H30-R1 Heater and also 2 options with or without the extra pressure switch cable, this is the larger size with the extra pressure switch cable. Please double check the detail to get the right replacement!
More Detail:
- 3kw
- Fits 2 Inch Plumbing (76mm union thread)
- Length of metal tube 33cm
- Width of metal tube is exactly 5.7cm
Comes complete with:
- 1m power cable,
- 2m pressure switch cable,
- 2" female hot tub heater unions and tail pieces,
- 2 New union seals
- The "Pressure Switch" inside is connected to the separate cable.
Fitting
Make sure their are no blockages or restrictions of water flow, filters are clean and all air is removed from the heater tube before switching on the power.
Related Products
