Home > Search By Brand > Waterway
Currently Out Of Stock
This is a very versatile pump wet end that can be used in many situations. This 48 frame wet end requires unions for 2" plumbing (Actual Size 3")and is 2HP.
*fits Waterway 48 Frame pumps only*
This is a slightly smaller wet end than the standard Waterway pump wet ends, but has a larger impeller, hence the title Hi-Flo, the front plate has a slightly different code of 311-2140 and E128519 but isn't available separately.
Although this hot tub part is complete and includes the impeller and shaft seal, you may need bolts to hold it onto the motor.
Fits 2" Plumbing
Quick Find Code: 14019Brand: WaterwayItem Height: 19Item Width: 12Item Length: 17Wet End Frame Size: 48 FrameImpellor HP Size: 4 HPWet End Suction Location: RightWet End Return Location: MiddleWet End Return Union Size: Fits 2" PlumbingWet End Suction Union Size: Fits 2" PlumbingPlumbing Size (Inch's): 2Type: Hot Tub Motor Wet End
Please note all Hot tub Parts sold are UK Spec, which means designed for 230 V at 50Hz
At Hot Tub DIY we want to make it as easy as possible for you to repair your hot tub, the following guides relate to this product.
For a full list of guides please go to our Articles page and choose a section : Hot Tub Help Articles
Hot Tub Pump Guides
1 call very helpful said what i was after was givin part number bought it sent with in a few days 1st class service
Was this helpful to you? Yes / No
This review has not been appraised.
The product is good in itself but for the price, its a shame it doesnt come with a selection of new seals. The old wet end held the o ring seal for the top/side connection whereas the connector held the o ring for the centre connection. The new wet end relies on the o rings being in a groove on the tub pipework so I needed to make a second order for flat seals (including more postage and further delay). Its a shame this isnt noted with the product description or a selection of seals provided with the product.
Brilliant very helpful
I will be using these people again for all my spares very good and best of all they are very quick thanks
1 of 1 people found this review helpful.
Purchased this pump as a direct replacement for my old discontinued unit. Recommended as a direct replacement. Easy to install and was indeed a direct replacement with everything fitting well. Performance is very good also.
The original pump I had was now obsolete. The Hi Flo 2HP was the recommended replacement. The advice given by the team was excellent and the replacement fitted straight in with no modifications. Only the addition of a thin washer and required a little more tightening to ensure leak free installation. Excellent service thank you.
ok but problem fitting the top hose due to shorter pipe coming out which we have resolved by fitting several seals....the gap is approx 15ml difference.
Hi,which wet end did this replace? a HA440?RegardsJon
I would recommend this company. They were extremely helpful There customer service and advice was outstanding and the 48 frame wet end went straight on my hydro air magnaflow 440 pump
Company very helpful. Bought this for a wet end replacement for the Magnaflow 440 fitted a treat.
4 of 4 people found this review helpful.