Hot Tub Pump Made By Emerson
This is a replacement 48 Frame 2 Speed 2hp Pump for the Waterway Executive Pump, it is made from the same wet end found on a Executive pump and a Emerson 2hp motor (UK Spec Motor) Due to the original motors no longer being available.
The hot tub pumps are exactly the same size (please see photos) which make for a really easy fit.
The pump is easily recognisable due to being smooth sided like a can with a capacitor housings being mounted on the top of the motor.
This pump comes with a 2" (7.6cm wide) plumbing connection on the side of the wet end and a larger 2.5" (9.3cm wide) plumbing connections on the front faceplate.
Getting the right size face plateTheir are 2 sizes of faceplate for this pump described as 2" and 2 1/2" the actual measurements and images can be seen in our how 'Hot Tub Guides and Videos' see Pump Union Guide
The wet end on the pump can easily be rotated to point either up, down, left or right by simply undoing the bolts that hold it onto the rear.
This pump is 2hp please see specification tab.
Note when fitting the wet end can be rotated to embrace plumbing that comes in from the side.
Fits 2" plumbing unions (6.8cm O/D), but a 2.5" faceplate can also be fitted on request (8.1cm O/D).
No Cable is included with this pump, please see cables sold separately.
Related Products